Conveyor body | Idle ends | Drive unit – end drives | Drive unit – high capacity end drives | Drive unit – center drives | Drive end – offset transfer | Drive end – in line transfer | Bends – horizontal bends | Bends – up vertical bends | Bends – down vertical bends
XOT • Open top conveyor Table-top chain
Areas of applications
- Plastic and glass container packing lines.
- Corrosive environments.
Advantages
- Minimum maintenance.
- Maximum resistance to harsh products and environments.
Geometry
- The belt rides on two stainless steel “L” channels.
- Ultra high molecular weight polyethylene (UHMW) wearstrips.
Unique cleaning advantages
- 1-½” clearance between the raised raceway and the body.
- Stainless steel raceways without crevices.
- End barriers to prevent product entrance to the lower body.
- Minimum horizontal surfaces where debris or product could accumulate.
Unique maintenance advantages
- Sealed bearings, no lubrication necessary.
- No squeaking belt curve guides.
Unique fabrication advantages
- Belt elongation gage.
- Pre-engineered transfer plates and accessories.
Unique ergonomic advantages
- Optional minimum body depth; allows operators to place their legs under the conveyor.
Pre-engineered accessories
- See the Ancillary Equipment section.
- Your accessory: give us your requirements, we will custom-design it at affordable prices.
Options
- See the Ancillary Equipment section.
- No-tool return wearstrip removal (on straight sections only).
- Inspection/cleaning windows on the body.
- Swivel end safety guards.
- Discharge end product slide.
- Metal detector, metal free zone.
- Washdown motors, controls and reducers.
- Chain-driven models:
- Torque limiter.
- No-lubrication chain.
- Timing belts.
- See-through chain cover.
Mechanical specifications
- Standard belt type: table-top chain (LF).
- Optional belt types and cleats: contact us.
- Standard belt material: acetal low friction.
- Optional belt material: contact us.
- Standard belt color: brown.
- Straight conveyor belt widths: 3-¼”, 4-½”, 6”, 7-½”, 10”, 12”.
- Curved conveyor belt widths: 3-¼”, 4-½”, 7-½”, 10”, 12”.
- Conveyor length: minimum 36” long.
- Frame material: stainless steel 304, gage 12.
- Frame finish: polished to a #4 finish.
- Weld finish: continuous heli-arc welds, grounded and polished.
- Reducer: direct mount, vent free aluminum alloy housing.
- Bearings: two bolt flange bearings, permanently lubricated.
- Mechanical specifications are subject to change without prior notification.
Ordering information
- Part numbering legend: refer to page XOT 19.
- Motor package: refer to conveyor components section on page XCC 81.
- Optional control panel: refer to conveyor components section on page XCC 89.
- Guide rails: refer to conveyor components section on page XCC 93.
- Supports: refer to conveyor components section on page XCC 99.
- Custom application: contact factory for assistance.
|
Conveyor Body
|
| Standard profile |
|
|
|
|
| Straight conveyor |
Belt width
|
X |
Length |
Curved conveyor |
| XOT-S01-C-YYY-0325 |
3-1/4” |
3-31/32” |
YYY |
XOT-C01-C-YYY-0325 |
| XOT-S01-C-YYY-0450 |
4-1/2” |
5-7/32” |
YYY |
XOT-C01-C-YYY-0450 |
| XOT-S01-C-YYY-0600 |
6” |
6-23/32” |
YYY |
Not available |
| XOT-S01-C-YYY-0750 |
7-1/2” |
8-7/32” |
YYY |
XOT-C01-C-YYY-0750 |
| XOT-S01-C-YYY-1000 |
10” |
10-23/32” |
YYY |
XOT-C01-C-YYY-1000 |
| XOT-S01-C-YYY-1200 |
12” |
12-23/32” |
YYY |
XOT-C01-C-YYY-1200 |
| XOT-S01-C-YYY-BBBB |
BBBB |
|
YYY |
XOT-C01-C-YYY-BBBB |
|
|
|
|
|
| Straight conveyor |
Belt width
|
X |
Length |
Curved conveyor |
| XOT-S02-C-YYY-0325 |
3-1/4” |
3-31/32 |
YYY |
XOT-C02-C-YYY-0325 |
| XOT-S02-C-YYY-0450 |
4-1/2” |
5-7/32” |
YYY |
XOT-C02-C-YYY-0450 |
| XOT-S02-C-YYY-0600 |
6” |
6-23/32” |
YYY |
Not available |
| XOT-S02-C-YYY-0750 |
7-1/2” |
8-7/32” |
YYY |
XOT-C02-C-YYY-0750 |
| XOT-S02-C-YYY-1000 |
10” |
10-23/32” |
YYY |
XOT-C02-C-YYY-1000 |
| XOT-S02-C-YYY-1200 |
12” |
12-23/32” |
YYY |
XOT-C02-C-YYY-1200 |
| XOT-S02-C-YYY-BBBB |
BBBB |
|
YYY |
XOT-C02-C-YYY-BBBB |
|
|
|
|
|
|
Straight conveyor cross section
|
Curved conveyor cross section
|
|
Standard Profile
|
Low Profile
|
Standard Profile
|
Low Profile
|
|
Z = 8-1/4”
|
Z = 4”
|
Z = 8-1/4”
|
Z = 4”
|
 |
|
|
|
|
|
|
|
|
| Note: Maximum section length: 10’-0”. |
|
|
Idle Ends
| Straight conveyor |
Belt width
|
X |
Curved conveyor |
| XOT-S01-I-0325 |
3-1/4” |
3-31/32” |
XOT-C01-I-0325 |
| XOT-S01-I-0450 |
4-1/2” |
5-7/32” |
XOT-C01-I-0450 |
| XOT-S01-I-0600 |
6” |
6-23/32” |
Not available |
| XOT-S01-I-0750 |
7-1/2” |
8-7/32” |
XOT-C01-I-0750 |
| XOT-S01-I-1000 |
10” |
10-23/32” |
XOT-C01-I-1000 |
| XOT-S01-I-1200 |
12” |
12-23/32” |
XOT-C01-I-1200 |
| XOT-S01-I-BBBB |
BBBB |
|
XOT-C01-I-BBBB |
|
|
|
|
Note: For low profile conveyor selection refer to the part numbering legend on page XOT19.
Idle section length will be given by total conveyor length. |
 |
|
|
|
Drive unit – end drives
| Left hand side |
|
|
|
| Straight conveyor |
Belt width
|
X |
Curved conveyor |
| XOT-S01-D-OEL-0325 |
3-1/4” |
3-31/32” |
XOT-C01-D-OEL-0325 |
| XOT-S01-D-OEL-0450 |
4-1/2” |
5-7/32” |
XOT-C01-D-OEL-0450 |
| XOT-S01-D-OEL-0600 |
6” |
6-23/32” |
Not available |
| XOT-S01-D-OEL-0750 |
7-1/2” |
8-7/32” |
XOT-C01-D-OEL-0750 |
| XOT-S01-D-OEL-1000 |
10” |
10-23/32” |
XOT-C01-D-OEL-1000 |
| XOT-S01-D-OEL-1200 |
12” |
12-23/32” |
XOT-C01-D-OEL-1200 |
| XOT-S01-D-OEL-BBBB |
BBBB |
|
XOT-C01-D-OEL-BBBB |
|
|
|
|
Note: For low profile conveyor and right hand selection refer to the part numbering legend on page XOT19.
Drive section length will be given by total conveyor length. |
|
 |
|
|
Drive unit – high capacity end drives
| Left hand side |
|
|
|
| Straight conveyor |
Belt width
|
X |
Curved conveyor |
| XOT-S01-D-OHL-0325 |
3-1/4” |
3-31/32” |
XOT-C01-D-OHL-0325 |
| XOT-S01-D-OHL-0450 |
4-1/2” |
5-7/32” |
XOT-C01-D-OHL-0450 |
| XOT-S01-D-OHL-0600 |
6” |
6-23/32” |
Not available |
| XOT-S01-D-OHL-0750 |
7-1/2” |
8-7/32” |
XOT-C01-D-OHL-0750 |
| XOT-S01-D-OHL-1000 |
10” |
10-23/32” |
XOT-C01-D-OHL-1000 |
| XOT-S01-D-OHL-1200 |
12” |
12-23/32” |
XOT-C01-D-OHL-1200 |
| XOT-S01-D-OHL-BBBB |
BBBB |
|
XOT-C01-D-OHL-BBBB |
|
|
|
|
Note: For low profile conveyor and right hand selection refer to the part numbering legend on page XOT19.
Drive section length will be given by total conveyor length. |
|
 |
|
|
Drive unit – center drives
| Left hand side |
|
|
|
| Straight conveyor |
Belt width
|
X |
Curved conveyor |
| XOT-S01-D-OCL-0325 |
3-1/4” |
3-31/32” |
XOT-C01-D-OCL-0325 |
| XOT-S01-D-OCL-0450 |
4-1/2” |
5-7/32” |
XOT-C01-D-OCL-0450 |
| XOT-S01-D-OCL-0600 |
6” |
6-23/32” |
Not available |
| XOT-S01-D-OCL-0750 |
7-1/2” |
8-7/32” |
XOT-C01-D-OCL-0750 |
| XOT-S01-D-OCL-1000 |
10” |
10-23/32” |
XOT-C01-D-OCL-1000 |
| XOT-S01-D-OCL-1200 |
12” |
12-23/32” |
XOT-C01-D-OCL-1200 |
| XOT-S01-D-OCL-BBBB |
BBBB |
|
XOT-C01-D-OCL-BBBB |
|
|
|
|
Note: For low profile conveyor and right hand selection refer to the part numbering legend on page XOT19.
Drive section length will be given by total conveyor length. |
|
 |
|
|
Drive end – offset transfer
| Left hand side |
|
|
|
|
| Straight conveyor |
Belt width
|
X |
A |
Curved conveyor |
| XOT-S01-D-OOL-0325 |
3-1/4” |
3-31/32” |
7-5/16” |
XOT-C01-D-OOL-0325 |
| XOT-S01-D-OOL-0450 |
4-1/2” |
5-7/32” |
9-27/32” |
XOT-C01-D-OOL-0450 |
| XOT-S01-D-OOL-0600 |
6” |
6-23/32” |
12-13/16” |
Not available |
| XOT-S01-D-OOL-0750 |
7-1/2” |
8-7/32” |
15-13/16” |
XOT-C01-D-OOL-0750 |
| XOT-S01-D-OOL-1000 |
10” |
10-23/32” |
20-13/16” |
XOT-C01-D-OOL-1000 |
| XOT-S01-D-OOL-1200 |
12” |
12-23/32” |
24-13/16” |
XOT-C01-D-OOL-1200 |
| XOT-S01-D-OOL-BBBB |
BBBB |
|
|
XOT-C01-D-OOL-BBBB |
|
|
|
|
|
Note: For low profile conveyor and right hand selection refer to the part numbering legend on page XOT19.
Consult factory for narrower gap distance. |
|
 |
|
|
Drive end – in line transfer
| Left hand side |
|
|
|
|
| Straight conveyor |
Belt width
|
X |
A |
Y |
| XOT-C01-D-OIL-0325 |
3-1/4” |
3-3/8” |
7-5/16” |
71-11/16” |
| XOT-C01-D-OIL-0450 |
4-1/2” |
4-5/8” |
9-27/32” |
75-9/16” |
| XOT-C01-D-OIL-0750 |
7-1/2” |
7-5/8” |
15-13/16” |
79-31/32” |
| XOT-C01-D-OIL-1000 |
10” |
10-1/8” |
20-13/16” |
83-1/2” |
| XOT-C01-D-OIL-1200 |
12” |
12-1/8” |
24-13/16” |
85-7/8” |
| XOT-C01-D-OIL-BBBB |
BBBB |
|
|
|
|
|
|
|
|
Note: For low profile conveyor and right hand selection refer to the part numbering legend on page XOT19.
Drive section length will be given by total conveyor length.
Available only for curved conveyor. Consult factory for narrower gap distance. |
|
 |
|
|
|
|
Bends – horizontal bends
|
| 30° Horizontal bends |
 |
| Curved conveyor |
Belt Width
|
X |
R |
| XOT-C01-B-030-0325 |
3-1/4” |
3-31/32” |
18” |
| XOT-C01-B-030-0450 |
4-1/2” |
5-7/32” |
24” |
| XOT-C01-B-030-0750 |
7-1/2” |
8-7/32” |
24” |
| XOT-C01-B-030-1000 |
10” |
10-23/32” |
24” |
| XOT-C01-B-030-1200 |
12” |
12-23/32” |
24” |
| XOT-C01-B-030-BBBB |
BBBB |
|
|
Note: Available only for curved conveyor.
For low profile replace “C01” with “C02”. |
|
| 45° Horizontal bends |
 |
| Curved conveyor |
Belt Width
|
X |
R |
| XOT-C01-B-045-0325 |
3-1/4” |
3-31/32” |
18” |
| XOT-C01-B-045-0450 |
4-1/2” |
5-7/32” |
24” |
| XOT-C01-B-045-0750 |
7-1/2” |
8-7/32” |
24” |
| XOT-C01-B-045-1000 |
10” |
10-23/32” |
24” |
| XOT-C01-B-045-1200 |
12” |
12-23/32” |
24” |
| XOT-C01-B-045-BBBB |
BBBB |
|
|
Note: Available only for curved conveyor.
For low profile replace “C01” with “C02”. |
|
| 90° Horizontal bends |
 |
| Curved conveyor |
Belt Width
|
X |
R |
| XOT-C01-B-090-0325 |
3-1/4” |
3-31/32” |
18” |
| XOT-C01-B-090-0450 |
4-1/2” |
5-7/32” |
24” |
| XOT-C01-B-090-0750 |
7-1/2” |
8-7/32” |
24” |
| XOT-C01-B-090-1000 |
10” |
10-23/32” |
24” |
| XOT-C01-B-090-1200 |
12” |
12-23/32” |
24” |
| XOT-C01-B-090-BBBB |
BBBB |
|
|
Note: Available only for curved conveyor.
For low profile replace “C01” with “C02”. |
|
| 180° Horizontal bends |
|
|
|
|
 |
| Curved conveyor |
Belt Width
|
X |
R |
Y |
| XOT-C01-B-180-0325 |
3-1/4” |
3-31/32” |
18” |
36” |
| XOT-C01-B-180-0450 |
4-1/2” |
5-7/32” |
24” |
48” |
| XOT-C01-B-180-0750 |
7-1/2” |
8-7/32” |
24” |
48” |
| XOT-C01-B-180-1000 |
10” |
10-23/32” |
24” |
48” |
| XOT-C01-B-180-1200 |
12” |
12-23/32” |
24” |
48” |
| XOT-C01-B-180-BBBB |
BBBB |
|
|
|
|
|
