Conveyor body | Idle ends | Drive unit – end drives | Drive unit – high capacity end drives | Drive unit – center drives | Drive end – offset transfer | Drive end – in line transfer | Bends – horizontal bends | Bends – up vertical bends | Bends – down vertical bends
XOM • Open top conveyor Mat-top / SS wire mesh
Areas of applications
- High and low product or ambient temperatures.
- High air or water flow around the product.
- In-place belt cleaning and sanitization.
- Flame curing on wire mesh conveyors.
- Applications where wide belts are required.
- Plastic and glass container packing lines.
- Medical devices assembly.
Advantages
- Washdown construction.
- Wide belts available.
- Minimum maintenance.
- Maximum resistance to harsh products and environments.
Geometry
- The belt rides on top of ultra high molecular weight polyethylene (UHMW) wearstrips.
- Inverted “L” channel profile.
Unique maintenance advantages
- Sealed bearings, no lubrication necessary.
Unique fabrication advantages
- Belt elongation gage.
- Unique ergonomic advantages.
- Optional: minimum body depth design. Allows operators to place their legs under the conveyor.
Pre-engineered accessories
- See the Ancillary Equipment section.
- Your accessory: give us your requirements, we will custom-design it at affordable prices.
Options
- See the Ancillary Equipment section.
- No-tool return wearstrip removal (on straight sections only).
- Inspection/cleaning windows on the body.
- Swivel end safety guards.
- Discharge end product slide.
- Metal detector, metal free zone.
- Discharge end product slide.
- Washdown motors, controls and reducers.
- Chain-driven models:
- Torque limiter.
- No-lubrication chain.
- Timing belts.
- See-through chain cover.
Mechanical specifications
- Straight conveyor belt type: different standard belts available. Consult factory.
- Curved conveyor belt type: different standard belts available. Consult factory.
- Optional belt type and cleats: contact us.
- Standard belt material: polypropylene.
- Optional belt material: contact us.
- Belt widths: from 4” to 72” (1” increments).
- Conveyor length: minimum 24” long.
- Frame material: stainless steel 304, gage 12.
- Frame finish: polished to a #4 finish.
- Weld finish: continuous heli-arc welds, grounded and polished.
- Reducer: direct mount, vent free aluminum alloy housing.
- Bearings: two bolt flange bearings, permanently lubricated.
- Mechanical specifications are subject to change without prior notification.
Ordering information
- Part numbering legend: refer to page XOM 26.
- Motor package: refer to conveyor components section on page XCC 82.
- Optional control panel: refer to conveyor components section on page XCC 89.
- Guide rails: refer to conveyor components section on page XCC 94.
- Supports: refer to conveyor components section on page XCC 99.
- Custom application: contact factory for assistance.
