XA Accessories | XA • Effective track lengths | XA • Effective track | XE • Effective track lengths

XA Accessories

Description
Rod bracket
Can be easily installed anywhere on the conveyor. It fits under the stainless steel top slide rail support. It has a ½” diameter thru hole, which can be used to support a ½” rod. This rod can be adapted to support different accessories, such as sensors, reflectors, scanners, reject nozzles, etc.

Parallel conveyor joint
Used to fix two conveyors side by side. It works as a clamp, so no drilling or welding is required during installation. Ideal for places where a side transfer is needed.

Material specifications
Stainless steel 304.

Technical specifications
• Rod bracket hole fits a ½” rod.
• Parallel joint allows a ½” gap between the belts.
Component specifications are subject to change without prior notification.

Ordering information
1. Rod bracket includes mounting hardware for installation.
2. Parallel joint includes mounting hardware for installation.

XA Accessories

Rod bracket
XAAA 13×24
Parallel conveyor joint
XACD 193×38

 

XA • Effective track lengths
The following table should be used when calculating how much conveyor chain, slide rail, top slide rail and stainless steel top slide rail is required. Contact factory for assistance.

Description
Effective track length (ft)
Track configuration
One-way chain
Two-way
chain
XA Conveyor beam
Chain 8.00 16.00
Top slide rail 8.00 16.00
SS top slide rail support 8.00 16.00
Slide rail 8.00 16.00
XA End drive unit
Chain N/A 2.50
Top slide rail 1.40 N/A
SS top slide rail support 1.40 N/A
Slide rail N/A N/A
XA Catenary drive unit
Chain 6.00 N/A
Top slide rail 2.80 N/A
SS top slide rail support 2.80 N/A
Slide rail N/A N/A
XA Idler end unit
Chain N/A 2.50
Top slide rail 1.40 N/A
SS top slide rail support 1.40 N/A
Slide rail N/A N/A

 

XA • Effective track

Description
Effective track length (ft)
Track configuration
One-way chain
Two-way
chain
XA 30° horizontal wheel bend
Chain 1.50 3.00
Top slide rail 1.80 1.80
SS top slide rail support 1.80 1.80
Slide rail N/A 2.19
XA 45° horizontal wheel bend
Chain 1.62 3.25
Top slide rail 1.80 1.80
SS top slide rail support 1.80 1.80
Slide rail N/A 2.34
XA 90° horizontal wheel bend
Chain 2.00 4.00
Top slide rail 1.80 1.80
SS top slide rail support 1.80 1.80
Slide rail N/A 2.77
XA 180° horizontal wheel bend
Chain 2.86 5.72
Top slide rail 1.80 1.80
SS top slide rail support 1.80 1.80
Slide rail N/A 3.67
XA 5° Vertical bend up
Chain 1.00 2.00
Top slide rail 1.13 1.13
SS top slide rail support 1.13 1.13
Slide rail N/A 1.96
XA 7° Vertical bend up
Chain 1.00 2.00
Top slide rail 1.13 1.13
SS top slide rail support 1.13 1.13
Slide rail N/A 2.05
XA 15° Vertical bend up
Chain 1.15 2.38
Top slide rail 1.13 1.13
SS top slide rail support 1.13 1.13
Slide rail N/A 2.30
XA 30° Vertical bend up
Chain 1.42 3.00
Top slide rail 1.13 1.13
SS top slide rail support 1.13 1.13
Slide rail N/A 3.15
XA 90° Vertical bend up
Chain 2.50 5.52
Top slide rail 1.13 1.13
SS top slide rail support 1.13 1.13
Slide rail N/A 6.02
XA 5° Vertical bend down
Chain 1.00 2.00
Top slide rail 1.13 1.13
SS top slide rail support 1.13 1.13
Slide rail N/A 1.94
XA 7° Vertical bend down
Chain 1.04 2.08
Top slide rail 1.13 1.13
SS top slide rail support 1.13 1.13
Slide rail N/A 2.02
XA 15° Vertical bend down
Chain 1.30 2.48
Top slide rail 1.13 1.13
SS top slide rail support 1.13 1.13
Slide rail N/A 2.37
XA 30° Vertical bend down
Chain 1.71 3.23
Top slide rail 1.13 1.13
SS top slide rail support 1.13 1.13
Slide rail N/A 3.03
XA 90° Vertical bend down
Chain 3.35 6.19
Top slide rail 1.13 1.13
SS top slide rail support 1.13 1.13
Slide rail N/A 5.66

 

XE • Effective track lengths
The following table should be used as a guide when calculating how much conveyor chain and slide rail is required for the XE components listed below. Contact factory for assistance.

Description
Effective track length (ft)
Track configuration
One-way chain
Two-way
chain
XE Conveyor beam
Chain 8.00 16.00
Slide rail 8.00 16.00
XE End drive unit
Chain N/A 2.50
Slide rail N/A 1.39
XE Idler end unit
Chain N/A 2.50
Slide rail N/A 1.39

 

XE • Effective track lengths

Description
Effective track length (ft)
Track configuration
One-way chain
Two-way
chain
XE 30° horizontal wheel bend
Chain 1.50 3.00
Slide rail 2.35 4.71
XE 45° horizontal wheel bend
Chain 1.62 3.25
Slide rail 2.51 5.02
XE 90° horizontal wheel bend
Chain 2.00 4.00
Slide rail 2.98 5.96
XE 180° horizontal wheel bend
Chain 2.86 5.72
Slide rail 3.91 7.83
XE Vertical plain bend – Up orientation
XE 5° Vertical bend up
Chain 0.95 1.93
Slide rail 1.89 3.85
XE 7° Vertical bend up
Chain 0.99 2.00
Slide rail 1.89 4.02
XE 15° Vertical bend up
Chain 1.13 2.35
Slide rail 2.26 4.69
XE 30° Vertical bend up
Chain 1.40 2.98
Slide rail 2.81 5.95
XE 90° Vertical bend up
Chain 2.50 5.50
Slide rail 4.98 10.98
XE Vertical plain bend – Down orientation
XE 5° Vertical bend down
Chain .98 1.93
Slide rail 1.96 3.85