Feet | Tube end | Bullet foot | Caster

Feet

Description
The articulated feet are available in different styles. Their main purpose is to provide a solid ground base to the conveyor. All of them, except for the casters, provide the vertical adjustment needed to level the conveyor properly.

Ground base
Has a 304 stainless steel 5/8-11 threaded bolt, which is used to adjust the height of the conveyor. The base swivels and is made of reinforced polyamide.
Ground base options include:
• Ground base without lag holes.
• Ground base without lag holes with vibration pad.
• Ground base with lag holes.
• Ground base with lag holes and vibration pad.
• Pull out resistant ground base without lag holes.
• Pull out resistant ground base without lag holes with vibration pad.
• Pull out resistant ground base with lag holes.
• Pull out resistant ground base with lag holes and vibration pad.

Use the vibration pad to reduce vibration transmitted to and from the conveyor. Use the lag holes option to anchor the conveyor to the floor. The pull out resistant option prevents the floor pad from being released from the leveling screw.
All of them require a threaded tube insert.

Threaded tube insert
Used to connect the ground base with the beam support leg. The threaded tube insert comes with
a 5/8-11 threaded brass insert and it is made of reinforced polyamide.

Bullet foot
Made of stainless steel, it does not require any insert for installation. Used in sanitary installations.

Caster with brake
The caster can swivel and it has a brake lock that simultaneously locks the wheel and the swivel. The wheel provided is phenolic and has a 4” diameter. These casters are installed in the support leg using a rubber expansion kit, which is provided with the caster.
Casters options include:
• Stainless steel 304: Corrosion resistant, excellent for washdown applications.
• Zinc plated.

Material specifications
Refer to the material specifications table on the technical reference catalogue in the downloads area.

Ordering information
1. The threaded tube end and the feet are sold separately.
2. The casters and bullet feet do not use any additional insert for installation.
3. Two conveyor support feets are required per support leg.

Feet
XAFS 15 Ground base without lag holes
XAFS 15 V
Ground base without lag holes with vibration pad
XAFS 15 H Ground base with lag holes
XAFS 15 VH Ground base with lag holes
and vibration pad
XAFS 15 L Pull out resistant ground base without lag holes
XAFS 15 VL
Pull out resistant ground base without lag holes
with vibration pad
XAFS 15 HL Pull out resistant ground base with lag holes
XAFS 15 VHL
Pull out resistant ground base with lag holes and vibration pad
XAFE 34 M15P Threated tube end
Note: Used to connect the ground base with the support leg
XAFS 34 B Bullet foot
XAAG 100S SS caster with brake,
4” diam. wheel
XAAG 100Z
Zinc steel caster
with brake, 4” diam. wheel