Con²Pak
Use
• Provides a pre-designed modular control system to perform the basic functions required in a conveying system.
Description
• The basic unit control panel includes:
• Fuse protection
• Master control relay
• Start/stop buttons
• Master power disconnect switch
• Wiring
• NEMA 4X enclosure
• The optional control functions are: emergency stop, jog, pedal switch, photo-eye signal start/stop, electric clutch/break, and motor overload protection.
Advantages
• Versatile: standard conveyor control functions in one package.
• Flexible: optional control modules are available and can be integrated to the basic Con²Pak control panel at the factory or by the customer. They can be purchased with the Con²Pak or separately.
• Uniform: minimum training and spare parts.
• Simple: no programming required, user-friendly internal wiring design. Step-by-step installation instructions are available with the optional items.
• Documentation: complete wiring diagrams, connecting instructions and spare parts list.
• Validation: there is no programmable logic controller, to ease validation requirements.
Basic operation
MCS Start/stop kit
• Provides start/stop function to the conveyor.
• Start/stop pushbutton on panel cover.
Optional operations
Remote start/stop kit
• Provides start/stop function to the conveyor.
• Includes start/stop pushbutton on a remote operator station.
• Standard mounting bracket and hardware.
Emergency stop kit
• Cuts power to the conveyor and control devices in the Con²Pak panel.
• Emergency stop pushbutton on panel cover.
Remote emergency stop kit
• Cuts power to the conveyor and control devices in the Con²Pak panel.
• Includes emergency stop pushbutton on a remote operator station.
• Standard mounting bracket and hardware.
Emergency pull cord
• Cuts power to the conveyor and control devices in the Con²Pak panel.
• Includes switch and mounting hardware.
• Pull cord not included.
Jog
• Upon pressing the jog button the conveyor operates.
• Jog pushbutton on panel cover.
Remote jog kit
• Upon pressing the jog button, the conveyor operates.
• Includes jog pushbutton on a remote operator station.
• Standard mounting bracket and hardware.
Pedal switch
• Can be connected eitheir N.O. or N.C. to provide a momentary signal to run or stop the conveyor.
Photo-eye signal start/stop
• Sends a signal from the photo-eye to start or stop the conveyor.
• Includes the bracket and the photo-eye.
Time-delay photo-eye signal start/stop
• Sends a time-delay signal from the photo-eye to start or stop the conveyor.
• Includes the bracket and the time-delay photo-eye.
• Electric clutch/break
• Provides an alternative to index or start/stop the conveyor via an electric clutch.
• An external signal, such as a foot switch, a jog signal or a photo-eye sensor is required.
• Frame: NEMA 56C.
Technical specifications
• Control enclosure:
• Body: ABS/PC blended plastic.
• Cover: Clear polycarbonate.
• Wires are identified and placed in appropriate wire ducts.
• Cable ends are placed on a wire terminal.
• Protection:
• Fuses for short circuit protection.
• Optional overload protection of the electric motor.
Component specifications are subject to change without prior notification.
Ordering information
1. Refer to the following table for selecting the correct part number.
XA/XE • Con²Pak conveyor control panel |
|||||||||||||||||||||||||||||||||||||||||||||||
|