|
End plate transfer | End roller transfer | Side transfer | Transfer shim | In-line transfer shim | Center roller module
Use
To transport the product from one conveyor to the next.
Description
End transfer
There are two types of end transfers:
- End plate transfer: the transfer surface consists of a stainless steel sheet. Use the in-line option when conveyors are in line to each other; or the 900 option when conveyors are perpendicular to each other.
- End roller transfer: the transfer surface consists of 5/8” diameter rollers. Use the in-line options when conveyors are in line to each other; or the 900 option when conveyors are perpendicular to each other.
Side transfer
The end of one conveyor is attached parallel to the infeed of the second conveyor. The parallel length is usually 18” and the transfer length is 12”.
Operation
The product glides through the transfer plate or is pushed through it by back pressure, depending on distance, speed, size and weight of the product.
Material specifications
Refer to the material specifications table on the technical reference section in the downloads area.
Design recommendations
Transfer distances should be kept to the minimum possible.
Accessories
• Transfer wheel: used in right transfer. The idler wheel is mounted on an adjustable base, to ensure proper package orientation through the transfer.
• Orientator wheel: used to rotate the product 90°.
Ordering information
1. For custom parts provide conveyor model number, pulley diameter and distance between center of pulleys, unless other information is indicated on drawings specifications.
2. To order a center roller module, desired length and type of roller transfer must be provided for correct support base selection.
| End plate transfer |
| AETP ILR |
Plate in-line transfer, right |
|
| AETP ILL |
Plate in-line transfer, left
|
| AETP ILC |
Custom plate in-line transfer |
|
|
|
|
|
|
|
|
|
Note: Shown in right position
|
|
| AETP L90R |
90° transfer plate, right |
|
| AETP L90L |
90° transfer plate, left
|
| AETP L90C |
Custom 90° transfer plate |
|
|
|
|
|
|
|
|
|
Note: Shown in right position
|
|
|
|
End roller transfer
|
| AETP RILR |
Roller in-line transfer, right |
|
| AETP RILL |
Roller in-line transfer, left
|
| AETP RILC |
Custom roller in-line transfer |
|
|
|
|
|
|
|
|
|
Note: Shown in right position
|
|
| AETP R90R |
90° transfer roller, right |
|
| AETP R90L |
90° transfer roller, left
|
| AETP R90C |
Custom 90° transfer roller |
|
|
|
|
|
|
|
|
|
Note: Shown in right position
|
|
|
|
Side transfer
|
| AETP DST |
Drive side transfer |
|
| AETP STC |
Custom side transfer
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
