The one-point adjustment guide rails are used when quick set-ups are required. Description • By rotating a single hand-wheel, the operator can open or close a section of conveyor guide rails to adjust them for different size products. • A digital counter ensures the exact repeatability of the setting. • Minor adjustments due to material variances (such as bottle diameter) can be performed easily and promptly. Operation External A gear reducer controls the guide movement and an external rod connected to a rack and pinion mechanism maintains the synchronization between the rails. Internal A gear reducer controls the guide movement and a rod below the conveyor body maintains the synchronization between the rails. Material specifications Refer to the material specifications table on the technical reference section in the downloads area. Technical specifications • Single side: 3” travel. • Double side: 3” travel on each side maintaining center line. Component specifications are subject to change without prior notification. Design recommendations • A drive unit is recommended at 20 ft. intervals. • Rack and pinion mechanism should be installed at 24” to 36” intervals. • Consult system builder for correct component selection. Ordering information 1. The 5/8” connecting rod is sold in 10 ft. sections. 2. Mounting hardware included. 3. For custom parts provide conveyor model number or conveyor cross section. One-point quick adjustment guide rails – external
One-point quick adjustment guide rails – external
One-point quick adjustment guide rails – internal
|