Pneumatic driver | Manual diverter | Manual stop | Pneumatic stop

Diverter, stops

 

Use
• Reject non-conforming product.
• Divert one lane to two lanes.
• Merge two lanes into one.
• Stop products flow.

 

Material specifications
Refer to the material specifications table on the technical reference section in the downloads area.

Technical specifications
• Maximum cycle rate: 30 cycles/minute.
• Rack and pinion in the double gate model.
• Pneumatic actuator in the single gate model.
• Pneumatic cylinder on the pneumatic stop.
• Pneumatic bladder on the bladder stop.
Component specifications are subject to change without prior notification.

Ordering information
1. The pneumatic system includes a 120 VAC solenoid valve.
2. For custom parts, provide conveyor model number or conveyor cross section, size and weight of package or product, and distance between center lines of conveyors.

Pneumatic diverter

AEDD PS

Single arm diverter
AEDD PSC Custom single arm diverter
AEDD PD

Double arm diverter
AEDD PDC Custom double arm diverter

 

Manual diverter

AEDD ML

Left arm manual diverter: YY=9”, Z=1”
AEDD MLC YYZ Custom left arm
manual diverter
AEDD MR Right arm manual diverter: YY=9”, Z=1”
AEDD DRC YYZ Custom right arm
manual diverter

Manual stop

AEDD MS

Manual stop:
XX=5”, ZZ=3”
AEDD MSC XXZ Custom manual stop
Custom part ordering information:
• XX, ZZ dimensions required

Pneumatic stop

AEDD CS

Cylinder stop:
A=1-7/16” to 4-5/16”
B=1-1/8” to 3-1/16”
AEDD CSC Custom cylinder stop
AEDD BS

Bladder stop
AEDD BSC Custom bladder stop
Accessories
AEAE… GenPak control panel

Refer to GenPak section.