XA Drive units | XE Drive units | Mounting kit
Drive Units
Description
XA/XE End drive
Designed to be positioned at one end of the conveyor. A gear reducer and motor drives the conveyor chain directly or by means of a roller chain transmis-sion system with an adjustable slip clutch (refer to the assembly manual for clutch adjustment instructions).
Four drive configurations are available: suspended motor and direct drive with transmission on left or right side. The drive configuration can be easily inverted, using the same components.
Direct end drive option and Chain end drive option are available for the XE model only.
The drive unit can be connected parallel with additional drive units, so a common motor can drive several conveyors together. This requires a longer drive shaft and a modified bearing arrangement, available upon request.
XA Catenary drive
Used in conveyors where chain return on the bottom of the conveyor beam is not suitable or required. A gear reducer and motor drives the conveyor chain by means of a roller chain transmission system with an adjustable slip clutch (refer to the assembly manual for clutch adjustment instructions).
Two drive configurations are available: suspended motor, transmission on left or right side. The drive configuration can be easily inverted, using the same components.
The drive unit can be connected parallel with additional drive units, so a common motor can drive several conveyors together. This requires a longer drive shaft and a modified bearing arrangement, available upon request.
As with the end drive, you must use a gear reducer mounting kit.
Material specifications
Refer to the component materials table on the technical reference catalogue in the downloads area.
Technical specifications
Number of teeth on drive wheel: 12.
For motor package, see table on motor package section.
For effective protection against personal injury, the drive unit is equipped with a chain cover, which should always be in place when the conveyor is running.
Component specifications are subject to change without prior notification.
Tools and accessories
XA/XE Gear reducer mounting kit
This kit provides the necessary hardware to attach a Leeson HMQ525 speed reducer and a standard support leg to any of the conveyor drive systems available. It can be inverted, depending on the drive configuration. The XA and XE chain end drive required a mounting kit.
Mounting kits for other reducers are available upon request.
Ordering information
- Select the most suitable drive unit configuration.
- Calculate the actual load and compare with the capacity of the drive unit. Contact us for the chain tension calculation.
- End and catenary drive unit includes: chain cover, slip clutch and connecting saddle.
- Mounting gear reducer kit for XA and XE chain end drive systems includes all necessary installation hardware.
| XA • Drive units |
| XAEB 0 HL |
End drive unit left hand side |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| XAEB 0 HR |
End drive unit right hand side |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| XAEC 0 HL |
Catenary drive unit left hand side |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| XAEC 0 HR |
Catenary drive unit right hand side |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
XE • Drive units |
| XEES 0 HL |
Standard end drive unit left hand side |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| XEES 0 HR |
Standard end drive unit right hand side |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| XEEB 0 HL |
Chain end drive unit left hand side |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| XEEB 0 HR |
Chain end drive unit right hand side |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Mounting kit |
| XAMK 525 L |
Gear reducer mounting kit
For speed reducer Leesson HMQ525 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Note: For other reducers consult factory.
Mounting hardware included.
Required only for the XA drive units and the XE Chain end drive unit. |
|
|
